(Integrated image mud (water) level gauge)DPLLR1601
- Real-time monitoring of the height of the sludge-water interface and the trend of the sludge layer changes
- Judging whether the sludge layer is too high, too low or experiencing abnormal fluctuations
- Linking the sludge discharge valve, sludge pump and the sludge return system
- Optimizing the dosage of coagulants, flocculants and coagulant aids
- Reducing the frequency of manual sampling and on-site inspections
- Helping to prevent sludge loss, increase in suspended solids in the effluent and clogging of the sedimentation tank
Parameters
1. Visual monitoring is more intuitive, and the interface status is clearly visible.
The integrated image sludge level meter observes the sludge-water interface in the water body through image means, and can directly reflect the height and changes of the sludge layer in the sedimentation tank, concentration tank or sludge tank. Compared with single numerical measurement, image information is more convenient for on-site personnel to judge the sludge status, verify the measurement results, and provide more direct basis for process adjustment.
2. Integrated structure design, easier installation and maintenance
The equipment integrates image acquisition, lighting, signal processing and communication units into one. The structure is compact, and the complexity of on-site installation and wiring is lower. It can be immersed in the water tank or installed at an appropriate position in the tank body, reducing the requirements for peripheral equipment and installation space. It is also convenient for daily inspection, maintenance and replacement, suitable for new projects and renovation of old stations.
3. Continuous real-time monitoring, reducing manual sampling and inspection
The integrated image sludge level meter can continuously monitor the changes in the sludge layer around the clock, continuously output the sludge level height and change trend, replacing the traditional manual sampling and regular inspection methods. This not only enables timely detection of sludge abnormalities but also reduces the time lag and judgment differences caused by manual operations, helping maintenance personnel to grasp the operation status of the sedimentation tank more promptly.
4. Intelligent recognition and support automatic control linkage
The equipment can analyze the sludge-water interface and sludge layer changes through image recognition and transmit the data to PLC, SCADA or wastewater treatment plant control system. It can link the sludge discharge valve, sludge pump, sludge return system and dosing equipment to achieve automatic sludge discharge, abnormal alarm and process optimization, helping to stabilize the effluent quality, reduce the dosage and energy consumption, and improve the automation level of wastewater treatment.